EarthQuaker Devices Grand Orbiter V3December 8, 2022
EarthQuaker Devices ...£98.00
Walrus Audio Eons Fu...£189.00
EarthQuaker Devices Grand Orbiter V3
£191.00
The EarthQuaker Devices Grand Orbiter V3 is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has a three-way toggle switch to select between the ranges of modulation… It’s brilliant…
Out of stock
The EarthQuaker Devices Grand Orbiter V3 is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has a three-way toggle switch to select between the ranges of modulation: Rate 1 is slow sweep mode, Rate 2 kills the LFO and allows you to use the Grand Orbiter as a fixed resonant filter and Rate 3 is fast sweep mode. So no matter what starlit galaxies you wanna go to, Grand Orbiter is definitely the right vessel for your intergalactic travels!
The master Rate control fine tunes the speed of the LFO in each of these modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass mode.
The Depth control blends the shifted signal in with the dry signal and controls the intensity of the effect. The Sweep control governs the peak frequency of the phased signal’s tone, turned full clockwise the sweep is lively and intense, whereas turning counter clockwise yields a darker, more laid back peak. The Resonance control provides a wide range of control over regeneration and at higher settings adds a more pronounced and resonant tone.
You can also use the EarthQuaker Devices Grand Orbiter V3 as a true pitch vibrato with the “Phase/Vibrato” switch. When in “Vibrato” mode, the dry signal is removed and the Depth controls acts as a volume control.
This pedal is 100% analog throughout, it’s true bypass and built entirely by hand in beachy Akron, Ohio.
PLEASE NOTE: The video linked below shows the V2 of the Grand Orbiter. We are selling the V3 with the Flexi switch. You can see it’s a V3 as there is no plastic surround around the foot switch, and the LED is mounted differently also.
If you need any further info, please get in touch.
- 4 stage OTA-based phaser
- 3 ranges of modulation
- Phase/vibrato mini-toggle
- New Flexi-switch for traditional or momentary latching
- True bypass - Silent soft-touch switching
- All-analog signal path
- Top-mounted jacks - for a more compact pedalboard
- Made by hand in the USA
| Dimensions | L: 4.8 in./12.1cm x W: 2.5 in./6.4cm x H: 2.25 in./5.7cm (including control knobs) |
|---|---|
| Effect Type | Phaser – And then some… |
| Power Requirements | Requires 9v DC power supply (Negative Centre – DO NOT RUN AT HIGHER VOLTAGES) – Power Consumption: 15mA – Power supply is not included. NOTE: No battery operation! |
| Build/Construction | Hand made in the USA. Solid metal enclosure. |
You must be logged in to post a review.
We are an online store only, so your new pedal has never been demoed on a shop floor or been out on display. We do though test all pedals (and any power supplies where included with pedals) before we send them out to hopefully minimise any hassles of faulty pedals on delivery.
We use recycled materials where possible for our packaging, and all our energy is from renewable sources. Check out our environmental page.
Find out more about Moji Music, thank you for your support.
There are no reviews yet.