Walrus Audio Slo Multi Texture ReverbJuly 24, 2024
Walrus Audio Polychr...£177.00
Walrus Audio Juliann...£204.00
Walrus Audio Slo Multi Texture Reverb
£179.00
The Walrus Audio Slo Multi Texture Reverb allows players to create lush, modulated, sleepy and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality.
Out of stock
The Walrus Audio Slo Multi Texture Reverb allows players to create lush, modulated, sleepy and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality. And ambient dream of long modulated reverbs, or short ‘standard’ reverbs but all with a character of its own.
Walrus tell us that calling someone Slo in Swedish may be considered an insult to some, but with adjectives like sleepy, drowsy and lazy, this perfectly describes the ambient atmospheres and tones the Slo can create.
The front mounted toggle switch allows three different reverb modes: Dark (lower octave), Rise (ambient swell) and Dream (latching pad), and secondary functions on the toggle switch change between three different wave shapes for the modulation on the reverb trail. This is the bit that for us makes this unit stand out and give it its distinct character.
DARK – This adds a lower octave to your reverb trail. You can create deep and wide atmospheric sounds and channel ‘out there’ soundscapes. The X knob sets the level of a -1 octave signal that feeds the reverb.
RISE – This is an auto-swell reverb for truly beautiful cinematic swells. The X knob sets the amount of time it takes the reverb to swell in after a note is played.
DREAM – This is a lush reverb with a latching pad function. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will ‘decrescendo’ according to where decay knob is set. The X knob then sets the depth of vibrato applied to the reverb trail.
And that’s not all… The Walrus Audio Slo also features 3 different wave shapes.
SINE – Smooth and even pitch up and down modulation.
WARP – Asymmetric pitch up modulation—similar to a warped record.
SINK – Asymmetric pitch down modulation for sinking detune, along the lines of a Bigsby.
A deservedly popular pedal, and as always—while nothing to do with the tone—we appreciate the great looking artwork and design.
Any questions, please drop us a line.
We’ve also got the manual you can download on this page (we try to do this with as many products as we can), so check that out also for any details.
- Multi texture reverb
- 3 reverb algorithms
- 2 wave shapes
- Momentary bypass & sustain
- Trails mode on/off option
- Stunning Walrus Audio artwork
- Top mounted jacks for maximising space on your pedalboard
- True bypass
| Dimensions | L: 4.77 in./12.1cm x W: 2.6 in./6.6cm x H: 2.3in./5.8cm (including knobs) |
|---|---|
| Effect Type | Reverb |
| Power Requirements | Requires 9v DC power supply (not supplied) – Power Consumption: 100mA. Walrus Audio recommend the use of an isolated power supply. |
| Build/Construction | Rugged die-cast enclosure. Made in the USA |
You must be logged in to post a review.
We are an online store only, so your new pedal has never been demoed on a shop floor or been out on display. We do though test all pedals (and any power supplies where included with pedals) before we send them out to hopefully minimise any hassles of faulty pedals on delivery.
We use recycled materials where possible for our packaging, and all our energy is from renewable sources. Check out our environmental page.
Find out more about Moji Music, thank you for your support.
There are no reviews yet.