EarthQuaker Devices Plumes

£114.00

SKU: ED-OD-001

The Plumes is a low to medium gain overdrive based on the trusty lime-green overdrive that has been an industry staple since its inception. This is the kind of overdrive that works in conjunction with a good valve amp to create the warm saturation people like to call “transparent”.

1 in stock

Category: Tags: , ,
Plumes Close Up
01
TOP MOUNTED SOCKETS
02
PERFECT FOR YOUR TUBE AMP
DOWNLOAD MANUAL

While this circuit has been the foundation of countless other overdrives available today, we feel the Plumes has a few twists and turns to make it unique enough to stand out.

The EarthQuaker Devices Plumes does away with the trusted JRC4558 OpAmp and the BJT buffers and replaces them with low noise JFET OpAmps for a more robust and precise signal with a significantly lower noise floor. The 9v power input is internally converted to +/- 9v for more headroom and a clarity that is almost three-dimensional. We’ve raised the input impedance to a whopping 10 megaohms for a stronger signal with more clarity and chime. We’ve also adjusted the cutoff of the tone control to deliver a more useful range of travel with more booming bass on the low end without sacrificing the cutting midrange and bright top end.

Last, but certainly not least, the EarthQuaker Devices Plumes offers three different clipping options to ensure that it will work with a wide variety of gear and playing styles. Mode 1 is symmetrical clipping utilizing a pair of light emitting diodes. This is the crunchiest setting the Plumes has to offer. When played through a clean amp, it’ll deliver a reasonable facsimile of that classic crunchy valve amp tone. Mode 2 is clean boost mode. This eliminates the soft clipping diodes altogether and leaves you with straight OpAmp drive. This is perfect for pushing your clean tone out in front or driving the preamp of an already overdriven amp into tasteful breakup territory. Mode 3 is an asymmetrical silicon diode arrangement similar to the stock screamer but with more output and clean clarity; the tone some people describe as “transparent”.

The Plumes features EarthQuaker Devices relay-based “soft touch” Flexi-Switch™ Technology for both momentary and latching footswitch operation as well as a very low 25mA current draw.

Each and every Plumes is built one-at-a-time by delightful little hands in Akron, Ohio; the charred, black heart in the heart of it all…

If you have any questions about this pedal or others, please do drop us a line. Also check out our blog on using overdrives.

  • 'Green' overdrive but with more headroom & lower noise
  • 3 different clipping options
  • Symmetrical LED, asymmetrical silicon and no diode OpAmp
  • Sculpt low end, clear top end and focused midrange
  • All-analog signal path
  • Silent soft-touch switching with True Bypass
  • USA made by hand
Green but better
TUBE
TONE

All analogue signal path

JFET OpAmps
THREE
DRIVES

LED, Silicon & OpAmp

Dimensions

L: 4.8 in./12.1cm x W: 2.5 in./6.4cm x H: 2.25 in./5.7cm (including control knobs)

Effect Type

Overdrive

Power Requirements

Requires 9v DC power supply (Negative Centre) – Power Consumption: 25mA – Power supply is not included. NOTE: No battery operation!

Build/Construction

Hand made in the USA. Solid metal enclosure.

There are no reviews yet.

Be the first to review “EarthQuaker Devices Plumes”

We are an online store only, so your new pedal has never been demoed on a shop floor or been out on display. We do though test all pedals (and any power supplies where included with pedals) before we send them out to hopefully minimise any hassles of faulty pedals on delivery.

We use recycled materials where possible for our packaging, and all our energy is from renewable sources. Check out our environmental page.

Find out more about Moji Music, thank you for your support.